-6000 QUADRO is one of the newest series within the wide product range of PIMAPEN.S-6000 QUADRO, owing to its distinguished profiles of 60 mm width and 4 chambers, has been designed to meet high insulation demands. The system with inner and outer seals can be applied to all kinds of doors and windows. Heat, sound, dust, air and water insulation is obtained by its high insulation features.S-6000 QUADRO meets requirements of all kinds of climate conditions perfectly. 111 mm frame& sash height creates more specious environments and a wide view due to its increased glazing area. Canals, covered by canal covering profile in the opening sections of the windows, have an aesthetic appearance and can be easily cleaned. Water reservoirs on all main profiles are inclined to enable better water drainage. PIMAPEN S- 6000 QUADRO is a complete system with all features such as mullion profile used in common for frame and sash profiles, glazing beads combining with an angle of 45 degree on the corners and it is completely compatible with S- 6000 CLASSIC PIMAPEN S- 6000 QUADRO The system consists of main profiles of 60 mm width. All main profiles have 4 chambers, providing max. heat and sound insulation. Minimized sash and frame height provides an extra wide glazing area. (sash +frame=111 mm) Main chamber (of the profiles) is large enough to enable any selection of reinforcement profiles with high statical strength value. The system has inner and outer seals. Sash and door profiles have 16mm forend with. Therefore all kinds of turn mechanisms can be easily used. System has sash and door profiles designed according to 13mm groove position, enabling an easy lock and therefore widely used by turn mechanisms manufacturers. The system is compatible with auxiliary profiles used in other series. Heat insulation coefficient of S-6000 QUADRO: U PROFİLE: 1,40 W/ M 2 K U WİNDOW :1,71 W M 2 K (with U GLASS :1,8 W/ M 2 K)